|
Skip to Main Content Select Theme Screen Reader Access
  • हिन्दी Eng
    •  

    Mechanical Journal Publications

    Journal Publications

    2025

    1. Parthasarathi Deb, Divyansh Singh, Mukund Kumar, Abhishek Paul: "Effect of high reactive fuel injection advancement and hydrogen-biodiesel premix ratio on combustion, performance and emission of a CI engine under RCCI mode" Fuel 382(Part-A), February 2025 https://doi.org/10.1016/j.fuel.2024.133710 SCI (6.7),
    2. Divyansh Singh, Abhishek Paul: "Performance and combustion assessment of CI engine fueled with waste co-pyrolysis oil" Journal of Thermal Analysis and Calorimetry February 2025 https://doi.org/10.1007/s10973-025-14095-x SCIE (3),
    3. Suhas Shreekrishna, Kiran Somisetti, Somnath Santra, Jayaprakash Karuppusamy, Sayan Das: "Thermally modulated interaction of compound droplets in a confined shear flow" Physics of Fluids 37(3), 2025 SCI (4.1),
    4. E. Tripathi, P. K. Patowari, S. Pati: "Enhanced mixing characteristics in a spiral micromixer with grooves having variable configurations: A computational analysis" Proc IMechE Part E: J Process Mechanical Engineering February 2025 10.1177/09544089251316778 (2.3),
    5. T. Sujith, S. K. Mehta, S. Pati: "Ion size-dependent heat transfer characteristics of electroosmotic flow through a microchannel considering interfacial slip" Physics of Fluids March 2025 10.1063/5.0257243 (4.1),
    6. A. J. Nath, D. K. Deka, S. Pati: "Thermally mediated droplet breakup dynamics within a symmetric T-junction" Journal of Fluids Engineering 147 August 2025 10.1115/1.4067961 (1.8),
    7. Soumith, V., Biswas, A. & Nath, S.: "Optimal Selection of a Sustainable Passive Heat Transfer Enhancement Technique for Circular Pipe Heat Exchanger Using MCDM Framework." Optimal Selection of a Sustainable Passive Heat Transfer Enhancement Technique for Circular Pipe Heat Exchanger Using MCDM Framework. 2025 https://doi.org/10.1007/s13369-024-09289-8

    2024

    1. Parthasarathi Deb, Abhishek Paul: "ancing the usability range of acetylene in CI engines through split injection of high-reactive fuel under RCCI operation: Optimized operability using an MCDM approach" Energy 308 September 2024 https://doi.org/10.1016/j.energy.2024.133073 SCI (9),
    2. Divyansh Singh, Abhishek Paul,: "An experimental study on enhancing performance and reducing emissions of CRDI engine operated on Co-pyrolysis oil using particle swarm optimization" Process Safety and Environmental Protection 188 August 2024 https://doi.org/10.1016/j.psep.2024.05.079 SCIE (6.9),
    3. Neeraj Baishya, Kaushik Das, Karan Roy, Helemoon Ahmed, Kalyan Chakraborty: "Optimal Selection of Machining Parameters for Minimization of Elementary Energy Consumption during Machining of 304 Austenitic Stainless steel" Materials Science Forum 1133 3-9 2024 10.4028/p-Ywfq8W Scopus
    4. Vaibhav Srivastava, Kalyan Chakraborty: "Machining Data Selection by Using a Fuzzy Logic Model" International Journal of Emerging Technology and Advanced Engineering 14 2024 10.46338/ijetae142324_3 Others
    5. Sandeep Kumar Pandey and Rajeev Nayan Gupta: "Investigation on Effects of Waste Glass Powder Reinforced HDPE Composites for Sustainability" Journal of Polymer Research 31 2024 https://doi.org/10.1007/s10965-024-04138-6 SCIE
    6. Sudhir Kumar and Rajeev Nayan Gupta: "Investigation of tribo-mechanical performance of nano-TiC/rGO based hybrid magnesium alloy-based metal matrix composites under dry sliding condition" Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2024 doi:10.1177/09544089241301274 SCIE (2.2),
    7. Sudhir Kumar and Rajeev Nayan Gupta: "Tribological Study of Magnesium-based AZ91/TiC/rGO Hybrid Composite Prepared by Powder Metallurgy Route: An Experimental and Analytical Approach" Advances in Materials and Processing Technologies 2024 DOI – 10.1080/2374068X.2024.2373562 SCIE
    8. Sandeep Kumar Pandey and Rajeev Nayan Gupta: "Synthesis, fabrication and tribo-mechanical studies of microcapsules filled and Al2O3/glass fibre reinforced UHMWPE based self-lubricating and self-healing composites" Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2024 https://doi.org/10.1177/146442072412982 SCIE
    9. S. Santra, N. Behera and S. Chakraborty,: "Modulating droplet electrohydrodynamics via the interplay of extensional flow and an alternating current electric field," Physics of Fluids 2024
    10. B Mondal, PK Patowari, S Pati: "Numerical and experimental investigations of mixing length in square wave serpentine micromixer with obstacles" Microsystem Technologies 30 March 2024 10.1007/s00542-024-05629-8 (1.6),
    11. K Mahanta, D Banerjee, P Bariar, P K Sah, S Arefin, S Pati, P Biswas: "Analysis of electroosmotically modulated peristaltic transport of third grade fluid in a microtube considering slip-dependent zeta potential" Journal of Fluids Engineering 146 April 2024 10.1115/1.4064997 (1.8),
    12. H Dey, S Pati, PR Randive, L Baranyi: "Effect of finned networks on PCM based battery thermal management system for cylindrical Li-ion batteries" Case Studies in Thermal Engineering May 2024 10.1016/j.csite.2024.104572 (6.4),
    13. S. Chakravarthy, P. R. Randive, S. Pati: "Implication of injection angle and jet to crossflow ratio on the combustion characteristics of a scramjet combustor" Proc IMechE Part E: J Process Mechanical Engineering May 2024 10.1177/09544089241253689 (2.2),
    14. D. Bhowmick, P. Randive, S. Pati: "Numerical Investigation on Effects of Swirl and Offset ratio on thermal transport characteristics and Entropy generation of Turbulent Jet flow" Proc IMechE Part E: J Process Mechanical Engineering September 2024 10.1177/09544089241272861 (2.2),
    15. D. Banerjee, S. Pati, P. Biswas: "Analysis of Electroviscous Effect for Flow of Micropolar Fluids in a Nanochannel with Overlapping Electric Double Layers at High Zeta Potential" Langmuir 40 September 2024 10.1021/acs.langmuir.4c02540 (3.5),
    16. M. P. Boruah, P.R. Randive, S. Pati: "Generation, Migration and Coalescence of Droplets: A State-of-the-Art Review from the Perspectives of Wettability, Inertia and Electric Field" Physics of Fluids December 2024 10.1063/5.0241194 (4.1),
    17. A. Nath, H. Dey, S. Pati: "Probing the hydrothermal performance of corrugated channels: A numerical scrutiny" International Communications in Heat and Mass Transfer November 2024 10.1016/j.icheatmasstransfer.2024.108303 (5.0),
    18. Virendra Kumar, Sujit Nath, Dipankar Bhanja: "Prediction of optimal dimensions and arrangements of circular tubes of a fin and tube heat exchanger for an improved thermal-hydraulic performance, Numerical Heat Transfer part–A, Taylor & Francis" Prediction of optimal dimensions and arrangements of circular tubes of a fin and tube heat exchanger for an improved thermal-hydraulic performance, Numerical Heat Transfer part–A, Taylor & Francis 2024 https://doi.org/10.1080/10407782.2024.2324443
    19. Divyansh Singh , Abhishek Paul: "Characterization and performance evaluation of co-pyrolysis oil from waste cooking oil and waste polyethylene as a potential diesel substitute" Fuel 362 April 2024 https://doi.org/10.1016/j.fuel.2023.130739 SCI (6.7),
    20. Divyansh Singh, Abhishek Paul: "Synthesis of diesel-like fuels using waste cooking oil and waste polyethylene via Co-pyrolysis process" Environmental Progress and Sustainable Energy 43(4), August 2024 https://doi.org/10.1002/ep.14413 SCIE (2.1),
    21. Parthasarathi Deb, Abhishek Paul: "Advancing RCCI engine performance via optimal acetylene premix ratios and advanced diesel injection timing: An experimental investigation" Environmental Progress and Sustainable Energy 43(4), August 2024 https://doi.org/10.1002/ep.14375 SCIE (2.1),
    22. SK Singh, S Halder: "Synthesis, characterization, and application of hydroxyapatite grafted over pristine charcoal/activated charcoal for removal of pb2+ ions from aqueous solution" Materials Today: Proceedings 106 Pages: 107-114 2024 https://doi.org/10.1016/j.matpr.2023.07.150 SCI (2.1),
    23. LN Borah, S Das, P Choudhury, S Halder: "Milled graphitic nanoparticle toughened epoxy composites via increased resistance to in-plane crack propagation" Materials Chemistry and Physics 314 4/ Pages: 1-12 February 2024 https://doi.org/10.1016/j.matchemphys.2024.128894 SCI
    24. NI Khan, S Halder, BR Gautam: "Self-healing of epoxy nanocomposites using Diels-Alder adduct grafted graphitic nanoplatelets" Results in Surfaces and Interfaces 14 1/ Pages: 1-5 2024 https://doi.org/10.1016/j.rsurfi.2024.100187
    25. S Kumar, S Hader, P Choudhury: "Nanoclay protonation and silane functionalization to enhance mechanical and fracture performance of epoxy nanocomposites" Polymer Composites 45(9), 1/ Pages: 7932-7949 March 2024 https://doi.org/10.1002/pc.28314 SCI

    2023

    1. Vinyas M, Vishwas M, Sathiskumar, Harursampath: "Machine learning assisted coupled frequency analysis of skewed multi-phase magnetoelectric composite plates with temperature and moisture dependent properties, Mechanics of Advanced Materials and Structures" Machine learning assisted coupled frequency analysis of skewed multi-phase magnetoelectric composite plates with temperature and moisture dependent properties, Mechanics of Advanced Materials and Structures 2023
    2. Mukund Kumar, & Abhishek Paul: "Comparative evaluation of combustion, performance, exergy and emission characteristics in hydrogen-biodiesel dual fuel engine under RCCI mode" Energy & Environment 37(7), April 2023 https://doi.org/10.1177/0958305X231167467 SCIE (4),
    3. Vishal Mishra, Kalyan Chakraborty: "The application of the TOPSIS method to identify the optimal machining parameters during the machining of the Mg-Ca treated Nickel-Chromium (EN36C ) case hardened steel" Nano World Journal 9 2023 10.17756/nwj.2023-s1-043 Scopus
    4. A. Borah, S. K. Mehta, S. Pati: "Analysis of conjugate heat transfer for forced convective flow through wavy minichannel" International Journal of Numerical Methods for Heat & Fluid Flow 33(1), January 2023 10.1108/HFF-01-2022-0031 (4.2),
    5. A. Kumar, S. K. Mehta, S. Pati, L. Baranyi: "Analysis of forced convective nanofluid flow through a wavy channel with linearly varying amplitude at the entrance" International Journal of Numerical Methods for Heat & Fluid Flow 33(1), January 2023 10.1108/HFF-01-2022-0034 (4.2),
    6. S. Das, S. Santra, and S. Chakraborty: "Thermally driven dynamics of interacting droplet-pairs in micro-confined shear flow: Beyond the realm of droplet coalescence" Physics of Fluids 2023
    7. S. K. Mehta, S. Pati, L. Baranyi: "Steric effect induced heat transfer for electroosmotic flow of Carreau fluid through a wavy microchannel" Technische Mechanik 43 February 2023 10.24352/UB.OVGU-2023-040
    8. D. K. Deka, S. Pati, L. Baranyi: "Influence of surface wettability on droplet spreading behaviour over a solid substrate" Technische Mechanik 43 February 2023 10.24352/UB.OVGU-2023-041
    9. S. Kumar, M. P. Boruah, S. Pati: "Hydrothermal performance for forced convective flow of viscoplastic fluid through a backward facing step channel" International Communications in Heat and Mass Transfer February 2023 10.1016/j.icheatmasstransfer.2023.106660 (6.4),
    10. D. K. Deka, S. Pati: "Electrocoalescence dynamics of two unequal-sized droplets" Colloids and Surfaces A: Physicochemical and Engineering Aspects February 2023 10.1016/j.colsurfa.2023.131152 (4.9),
    11. H. Dey, S. K. Mehta, F. A. Ahmed, P. Roy, S. Pati, L. Baranyi: "Numerical investigation of thermo-hydraulic features of viscoplastic flow in wavy channels" International Communications in Heat and Mass Transfer March 2023 10.1016/j.icheatmasstransfer.2023.106715 (6.4),
    12. E. Tripathi, P. K. Patowari, S. Pati: "Comparative assessments of mixing and pressure drop characteristics in spiral, serpentine and straight micromixers" Meccanica May 2023 10.1007/s11012-023-01676-z (2.0),
    13. D. Banerjee, S. Pati, P. Biswas: "Analytical study of pulsatile mixed electroosmotic and shear-driven flow in a microchannel with a slip-dependent zeta potential" Appl. Math. Mech. -Engl. Ed. 44 May 2023 10.1007/s10483-023-3010-6 (4.5),
    14. Jnanaranjan Acharya, Aishik Dinda, Dipankar Bhanja, Rahul Dev Misra, Sujit Nath: "Influence of aging and body location on the thermal performance of firefighter’s clothing exposed to radiant heat source" Influence of aging and body location on the thermal performance of firefighter’s clothing exposed to radiant heat source 2023 https://doi.org/10.1016/j.ijthermalsci.2022.108024
    15. Tamuli, B.R., Nath, S.: "A numerical study on the effect of condenser fin in micro heat pipe array based evacuated tube collector for water heating." A numerical study on the effect of condenser fin in micro heat pipe array based evacuated tube collector for water heating. 2023 https://doi.org/10.1007/s12046-023-02285-y
    16. Saurabh Sharma, Sujit Nath, Debayan Dasgupta: "Weakly nonlinear instability analysis of viscous planar liquid sheet under varicose mode of initial disturbance with co-flowing gas streams and prediction of resulting spray characteristics" Weakly nonlinear instability analysis of viscous planar liquid sheet under varicose mode of initial disturbance with co-flowing gas streams and prediction of resulting spray characteristics 101 2023 https://doi.org/10.1016/ j.euromechflu.2023.04.009
    17. Divyansh Singh, Abhishek Paul: "Energy, exergy, emission, exergoeconomic, enviroeconomic, and sustainability analysis of diesel engine, fueled by waste cooking oil and waste polyethylene co-pyrolysis oil-diesel blends" Journal of Cleaner Production 426 November 2023 https://doi.org/10.1016/j.jclepro.2023.139186 SCIE (9.8),
    18. Sunayna Saikia, Devesh Kumar, Subrata Bhoumik, Abhishek Paul: "Influence of fuel injection timing and pressure on the performance, combustion and exhaust emissions of a compression ignition engine fueled by titanium dioxide-doped biodiesel" Sunayna Saikia, Devesh Kumar, Subrata Bhoumik, Abhishek Paul 148 May 2023 https://doi.org/10.1007/s10973-023-12169-2 SCIE (3),
    19. Parthasarathi Deb, Abhishek Paul: "Effect of acetylene as a low reactivity fuel on performance, combustion, exergy and emissions of an acetylene/diesel RCCI engine with variable premix ratios" Sustainable Energy & Fuels 7 August 2023 DOI https://doi.org/10.1039/D3SE00440F SCIE (5),
    20. NI Khan, S Halder, MS Goyat, LN Borah, S Das: "Repetitive self-healing of Diels–Alder grafted graphene nanoplatelet reinforced carbon fiber reinforced polymer composites with outstanding mechanical properties" Soft Matter 19(17), 7/ Pages: 3121-3135 March 2023 https://doi.org/10.1039/D2SM01558G SCI (4.046),
    21. LN Borah, S Halder, P Choudhury: "Epoxy composites integrated with functionalized wet-milled graphitic nanoparticles: Featuring enhanced mechanical performance and in-plane fracture resistance" Polymer Composites 44(11), 3/ Pages: 7985-7996 August 2023 https://doi.org/10.1002/pc.27681 SCI (3.531),
    22. H Dutta, P Gurusamy, S Halder: "Enhancement of thermal and mechanical properties of polymer composite using a novel milled bamboo filler" 44(12), 4/ Pages: 8731-8749 September 2023 https://doi.org/10.1002/pc.27733 SCI (3.531),
    23. SK Singh, B Nayak, TJ Singh, S Halder: "Investigating the role of synthesized reduced graphene oxide and graphite micro-fillers on mechanical and fretting wear performance of glass fiber epoxy-based composite" High Performance Polymers 35(9), 6/ Pages: 946-962 August 2023 https://doi.org/10.1177/09540083231196087 SCI (2.1),
    24. NI Khan, S Halder, BR Gautam: "Preparation of Epoxy and Amine Containing Microcapsules with Solvent Evaporation Technique for Self-healing Adhesive Joint" International Conference on Mechanical Engineering Pages: 323-330 2023 SCI

    2022

    1. G. Nammi, D. K. Deka, S. Pati, L. Baranyi: "Natural convection heat transfer within a square porous enclosure with four heated cylinders" Case Studies in Thermal Engineering 30 February 2022 10.1016/j.csite.2021.101733 SCIE (6.4),
    2. A. Chourasia, D. K. Deka, D. Bhoumick, S. Pati, P. R. Randive: "Effect of aspect ratio of elliptic cylinders on natural convection inside a porous square enclosure" Journal of Thermophysics and Heat Transfer 36(3), February 2022 10.2514/1.T6466 (1.3),
    3. G. C. Pal, G. Nammi, S. Pati, P. R. Randive, L. Baranyi: "Natural convection in an enclosure with a pair of cylinders under magnetic field" Case Studies in Thermal Engineering 30 February 2022 10.1016/j.csite.2022.101763 SCIE (6.4),
    4. M. P. Boruah, P. R. Randive, S. Pati, K. C. Sahu: "Charge convection and interfacial deformation of a compound drop in plane Poiseuille flow under electric field" Physical Review Fluids January 2022 10.1103/PhysRevFluids.7.013703 (2.5),
    5. S. K. Mehta, S. Pati, L. Baranyi: "Effect of amplitude of walls on thermal and hydrodynamic characteristics of laminar flow through an asymmetric wavy channel" Case Studies in Thermal Engineering 31 March 2022 10.1016/j.csite.2022.101796 Scopus (6.4),
    6. S. Pati, A. Borah, M. P. Boruah, P. R. Randive: "Critical review on local thermal equilibrium and local thermal non-equilibrium approaches for the analysis of forced convective flow through porous media" International Communications in Heat and Mass Transfer 132 March 2022 10.1016/j.icheatmasstransfer.2022.105889 Scopus (6.4),
    7. S. K. Mehta, S. Pati: "Enhanced electroosmotic mixing in a wavy micromixer using surface charge heterogeneity" Industrial & Engineering Chemistry Research 61(7), February 2022 10.1021/acs.iecr.1c04318 (3.8),
    8. M. P. Boruah, P.R. Randive, S. Pati, S. Chakraborty: "Morpho-dynamic evolution due to inertia-mediated impact of a compound drop on a deep liquid pool" Physics of Fluids 34(3), March 2022 10.1063/5.0085814 SCIE (4.1),
    9. D. Banerjee, S. Pati, P. Biswas: "Analytical study of two-layered mixed electroosmotic and pressure-driven flow and heat transfer in a microchannel with hydrodynamic slippage and asymmetric wall heating" Physics of Fluids 34(3), March 2022 10.1063/5.0080107 SCIE (4.1),
    10. S. Pati, N. Goswami, D. Bhattacharya, P. Kalita, P. R. Randive: "Natural convection inside a square enclosure with an array of cylinders of different geometrical configurations" Journal of The Institution of Engineers (India): Series C 103 September 2022 10.1007/s40032-022-00875-z (1.5),
    11. S. K. Mehta, S. Pati: "Analysis of thermo-hydraulic characteristics for flow of MWCNT-Fe3O4/H2O hybrid nanofluid through a wavy channel under magnetic field" Proc IMechE Part E: J Process Mechanical Engineering 238(1), April 2022 10.1177/09544089221094206 (2.3),
    12. E. Tripathi, P. K. Patowari, S. Pati: "Mixing characteristics and pressure drop analysis in a spiral micromixer" Proc IMechE Part E: J Process Mechanical Engineering 236(6), 2022 10.1177/09544089221095636 (2.3),
    13. K. N. Vasista, S. K. Mehta, S. Pati: "Electroosmotic mixing in a microchannel with heterogeneous slip dependent zeta potential" Chemical Engineering & Processing: Process Intensification 176 June 2022 10.1016/j.cep.2022.108940 Scopus (3.8),
    14. S. K. Mehta, B. Mondal, S. Pati, P. K. Patowari: "Enhanced electroosmotic mixing of non-Newtonian fluids in a heterogeneous surface charged micromixer with obstacles" Colloids and Surfaces A: Physicochemical and Engineering Aspects 648 September 2022 10.1016/j.colsurfa.2022.129215 SCIE (4.9),
    15. Md. Faizan, S. Pati, P. R. Randive: "Implications of novel cold plate design with hybrid cooling on thermal management of fast discharging Lithium-ion battery" Journal of Energy Storage July 2022 10.1016/j.est.2022.105051 (8.9),
    16. A. J. Nath, D. K. Deka, S. Pati: "Numerical investigation of droplet generation within a microfluidic T-Junction with semi-cylindrical obstacle" Journal of Fluids Engineering August 2022 10.1115/1.4055177 (1.8),
    17. T. Kahali, S. Santra, and S. Chakraborty: "Electrically modulated cross-stream migration of a compound drop in micro-confined oscillatory flow" Physics of Fluids 2022
    18. A. J. Nath, P. Roy, D. Banerjee, S. Pati, P. R. Randive, P. Biswas: "Analytical solution to time periodic electroosmotic flow of generalized Maxwell fluids in parallel plate microchannel with slip-dependent zeta potential" Journal of Fluids Engineering 145 October 2022 10.1115/1.4055782 (1.8),
    19. E. Tripathi, P. K. Patowari, S. Pati: "Assessment of mixing performance in a spiral micromixer with different inlet path configurations" Sadhana 47 November 2022 10.1007/s12046-022-02019-6 (1.4),
    20. T. Sujith, S. K. Mehta, S. Pati: "Effect of finite size of ions on entropy generation characteristics for electroosmotic flow through microchannel considering interfacial slip" Journal of Thermal Analysis and Calorimetry 148 December 2022 10.1007/s10973-022-11731-8 (3.2),
    21. D. Banerjee, S. Pati, P. Biswas: "Analysis of electroviscous effect and heat transfer for flow of non-Newtonian fluids in a microchannel with surface charge-dependent slip at high zeta potentials" Physics of Fluids November 2022 10.1063/5.0123964 (4.1),
    22. M. P. Boruah, P.R. Randive, S. Pati: "Electrohydrodynamic tuning of the migration characteristics of a sedimenting compound drop" Journal of Fluid Mechanics 953 December 2022 10.1017/jfm.2022.929 (3.6),
    23. A. Kumar, S. K. Mehta, S. Pati, M. Mohanraj: "Analysis of thermal and hydraulic performances for flow in a wavy channel with varying amplitude" Journal of Thermal Analysis and Calorimetry 148 December 2022 10.1007/s10973-022-11784-9 (3.2),
    24. Md. Faizan, S. Pati, P. R. Randive, L. Baranyi: "Numerical study of nanofluid flow and heat transfer through a non-uniformly heated converging duct" Case Studies in Thermal Engineering November 2022 10.1016/j.csite.2022.102545 (6.4),
    25. Md. Faizan, S. Pati, P. R. Randive: "Effect of channel configurations on the thermal management of fast discharging Li-ion battery module with hybrid cooling" Energy December 2022 10.1016/j.energy.2022.126358 (9.0),
    26. K. Mahanta, S. Panda, D. Banerjee, S. Pati, P. Biswas: "Analysis of pulsatile combined electroosmotic and shear-driven flow of generalized Maxwell fluids in a microchannel with slip-dependent zeta potential" Phys. Scr. December 2022 10.1088/1402-4896/aca6b4 (2.3),
    27. S. K. Mehta, S. Pati: "Analysis of hydrothermal performance for laminar forced convective flow through a wavy channel with porous blocks" International Journal of Numerical Methods for Heat & Fluid Flow 33 May 2022 10.1108/HFF-06-2022-0370
    28. Dipak Debbarma,Krishna Murari Pandey , Abhishek Paul: "Truncated Double Layer Microchannel Heat Sink and Its Performance Improvement by Implicating Secondary Channel Combined along with Appropriate Cavities and Ribs in Channel Flow" Heat Transfer Engineering 44(19), November 2022 https://doi.org/10.1080/01457632.2022.2148346 SCIE (1.6),
    29. Abhishek Paul, Rajsekhar Panua, Dipankar Das & Mukund Kumar: "Effect of Diesel–Turpentine binary blends on performance, combustion, exergy and emission parameters of a stationary compression ignition engine" Journal of Thermal Analysis and Calorimetry 147 November 2022 https://doi.org/10.1007/s10973-022-11748-z SCIE (3),
    30. Mukund Kumar, Subrata Bhowmik, Abhishek Paul: "Effect of pilot fuel injection pressure and injection timing on combustion, performance and emission of hydrogen-biodiesel dual fuel engine" International Journal of Hydrogen Energy 47(68), August 2022 https://doi.org/10.1016/j.ijhydene.2022.06.260 SCIE (8.1),
    31. Subrata Bhowmik, Abhishek Paul, Rajsekhar Panua: "Performance, exhaust emission and combustion of ethanol–diesel–compressed natural gas dual-fuel compression-ignition engine: a trade-off study" Clean Technologies and Environmental Policy 24 January 2022 https://doi.org/10.1007/s10098-021-02256-z SCIE (4.2),
    32. Pravin Ashok Madane, Subrata Bhowmik, Rajsekhar Panua, P Sandeep Varma, Abhishek Paul: "Investigation and optimization of diesel engine outputs under undi biodiesel-diesel strategies" Journal of Thermal Science and Engineering Applications 14(3), March 2022 https://doi.org/10.1115/1.4051377 SCIE (1.6),
    33. Subrata Bhowmik, Nirupam Pal, Abhishek Paul, Rajsekhar Panua: "Effect of pilot injection and injection pressure on combustion, performance, exergy and exhaust emission of a bioethanol-diesel fuelled common-rail direct injection engine" International Journal of Exergy 37(4), April 2022 https://doi.org/10.1504/IJEX.2022.122077 SCIE (1.1),
    34. Dipak Debbarma, Krishna Murari Pandey, Abhishek Paul: "Performance Enhancement of Double‐Layer Microchannel Heat Sink by Employing Dimples and Protrusions on Channel Sidewalls" Mathematical Problems in Engineering 1 May 2022 https://doi.org/10.1155/2022/2923661 SCIE (1.4),
    35. Subrata Bhowmik, Abhishek Paul, Rajsekhar Panua: "Effect of pilot fuel injection timing on the performance, combustion, and exhaust emissions of biodiesel–ethanol–diethyl ether blend fueled CRDI engine under hydrogen dual fuel strategies" Environmental Progress and Sustainable Energy 41(4), August 2022 https://doi.org/10.1002/ep.13784 SCIE (2.1),
    36. Manik Chandra Biswas, Bodiuzzaman Jony, Pranab Kumar Nandy, Reaz Ahmed Chowdhury, Sudipta Halder, Deepak Kumar, Seeram Ramakrishna, Masud Hassan, Md Ariful Ahsan, Md Enamul Hoque, Muhammad Ali Imam: "Recent Advancement of Biopolymers and Their Potential Biomedical Applications" Journal of Polymers and the Environment 30 157/ Pages: 51-74 2022 https://doi.org/10.1007/s10924-021-02199-y SCI (5.3),
    37. S Das, S Halder, B Paul, NI Khan, MS .Goyat: "Impact of silanized milled graphite nanoparticles on thermo-mechanical properties of epoxy nanocomposite" Materials Chemistry and Physics 278 24/ Pages: 1-10 February 2022 https://doi.org/10.1016/j.matchemphys.2021.125601 SCI (4.6),
    38. P Choudhury, S Hader, S Das: "Mixing for Graphene Infusion to make Hybrid GFRPs: Study on Mechanical Performance" Journal of Composite Materials 56(9), 6/ Pages: 1321-1333 March 2022 https://doi.org/10.1177/00219983221073980 SCI (2.9),
    39. D Talukdar, S Halder, S Das, Ms Goyat, AK Mishra: "A molecular dynamics simulation study to investigate the effect of C60 on thermo-mechanical and elastic properties of DGEBA/DETA nanocomposites" 32(3), Pages: 32-42 2022 https://doi.org/10.55713/jmmm.v32i3.1265 SCI
    40. S Halder, J Wang, Y Fang, X Qianb, M Ali Imam: "Cenosphere-based PCM microcapsules with bio-inspired coating for thermal energy storage in cementitious materials" Materials Chemistry and Physics 291 27/Pages: 1-11 February 2022 https://doi.org/10.1016/j.matchemphys.2022.126745 SCI (4.6),

    2021

    1. S. K. Mehta, S. Pati: "Thermo-hydraulic and entropy generation analysis for magnetohydrodynamic pressure driven flow of nanofluid through an asymmetric wavy channel" International Journal of Numerical Methods for Heat & Fluid Flow 31(4), March 2021 10.1108/HFF-05-2020-0300 (4.2),
    2. A. Borah, S. Pati: "Influence of non-uniform asymmetric heating on conjugate heat transfer in a rectangular minichannel using nanofluid by two-phase Eulerian-Lagrangian method" Powder Technology 381 March 2021 10.1016/j.powtec.2020.12.037 SCIE (4.5),
    3. S. K. Mehta, S. Pati, S. Ahmed, P. Bhattacharyya, J. J. Bordoloi: "Analysis of thermo-hydraulic and entropy generation characteristics for flow through ribbed-wavy channel" International Journal of Numerical Methods for Heat & Fluid Flow 32(5), July 2021 10.1108/HFF-01-2021-0056
    4. S. Chakravarthy, P. Randive, S. Pati: "Implication of air-throttling on combustion characteristics of cavity-strut based scramjet combustor" Acta Astronautica 188 July 2021 10.1016/j.actaastro.2021.07.022 SCIE (3.1),
    5. S. Pabi, S. K. Mehta, S. Pati: "Analysis of thermal transport and entropy generation characteristics for electroosmotic flow through a hydrophobic microchannel considering viscoelectric effect" International Communications in Heat and Mass Transfer 127 August 2021 10.1016/j.icheatmasstransfer.2021.105519 (6.4),
    6. B. Mondal, S. K. Mehta, S. Pati, P. K. Patowari: "Numerical analysis of electroosmotic mixing in a heterogeneous charged micromixer with obstacles" Chemical Engineering & Processing: Process Intensification 168 August 2021 10.1016/j.cep.2021.108585 SCIE (3.8),
    7. Md. Faizan, S. Pati, P. R. Randive: "Effect of non-uniform heating on conjugate heat transfer performance for nanofluid flow in a converging duct by two phase Eulerian–Lagrangian method" Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236(2), September 2021 10.1177/09544089211042951 (2.2),
    8. E. Tripathi, P. K. Patowari, S. Pati: "Numerical investigation of mixing performance in spiral micromixers based on Dean flows and chaotic advection" Chemical Engineering & Processing: Process Intensification 169 September 2021 10.1016/j.cep.2021.108609 SCIE (3.8),
    9. A. Sarker, M. B., P. Randive, S. Pati: "The role of compound droplet size on transition from jetting to bubble entrapment during its impact on liquid" Physics of Fluids 33(10), October 2021 10.1063/5.0064564 SCIE (4.1),
    10. K. N. Vasista, S. K. Mehta, S. Pati: "Numerical assessment of hydrodynamic and mixing characteristics for mixed electroosmotic and pressure-driven flow through a wavy microchannel with patchwise surface heterogeneity" Proc IMechE Part E: J Process Mechanical Engineering November 2021 10.1177/09544089211051640 SCI (2.2),
    11. D. Banerjee, S. K. Mehta, S. Pati, P. Biswas: "Analytical solution to heat transfer for mixed electroosmotic and pressure-driven flow through a microchannel with slip-dependent zeta potential" International Journal of Heat and Mass Transfer 181 October 2021 10.1016/j.ijheatmasstransfer.2021.121989 SCIE (5.0),
    12. S. Dutta, S. Pati, L. Baranyi: "Numerical analysis of magnetohydrodynamic natural convection in a nanofluid filled quadrantal enclosure" Case Studies in Thermal Engineering September 2021 10.1016/j.csite.2021.101507 SCIE (6.4),
    13. D. K. Deka, S. Pati, P. Randive: "Implications of capillarity-wettability interaction on geometrically mediated droplet splitting mechanism" Colloids and Surfaces A: Physicochemical and Engineering Aspects 633 November 2021 10.1016/j.colsurfa.2021.127873 Scopus (4.9),
    14. M. P. Boruah, A. Sarker, P. R. Randive, S. Pati, K. C. Sahu: "Tuning of regimes during two-phase flow through a cross-junction" Physics of Fluids 33(12), December 2021 10.1063/5.0071743 SCIE (4.1),
    15. K. Naga Vasista, S. K. Mehta, S. Pati, S. Sarkar: "Electroosmotic flow of viscoelastic fluid through a microchannel with slip-dependent zeta potential" Physics of Fluids 33(12), December 2021 10.1063/5.0073367 SCIE (4.1),
    16. Rajeev Nayan Gupta: "Study of pulse electrodeposition parameters for nano YSZ-Ni coatings and its effect on tribological and corrosion characteristics" Applied Nanoscience 11(1), 2021 https://doi.org/10.1007/s13204-020-01567-9 SCIE
    17. S. Santra and S. Chakraborty: "Steady axial electric field may lead to controllable cross-stream migration ofdroplets in confined oscillatory microflows" Journal of Fluid Mechanics 2021
    18. D. P. Panigrahi, S. Santra, T. N. Banuprasad, S. Das, and S. Chakraborty: "Interfacial viscosity-inducedsuppression of lateral migration of a surfactant laden droplet in a non-isothermal Poiseuille flow" Physical Review Fluids, American Physical Society 2021
    19. S. Bandyopadhyay, S.Santra, S.S Das, R. Mukherjee*, and S. Chakraborty: "Non-wetting Liquid-InfusedSlippery Paper" Langmuir 2021
    20. T Prasad, S Halder, SS Dhar, MS Goyat: "Epoxy/imidazole functionalized silica epoxy nanocomposites: mechanical and fracture behaviour" Express Polymer Letters 15(3), 12/ Pages: 203-233 2021 https://doi.org/10.3144/expresspolymlett.2021.19 SCI (3.952),
    21. Khan, S Halder, N Talukdar, S Das, MS Goyat: "Surface oxidized/silanized graphite nanoplatelets for reinforcing an epoxy matrix" Materials Chemistry and Physics 258 19/ Pages: 1-12 2021 https://doi.org/10.1016/j.matchemphys.2020.123851 SCI (4.6),
    22. NI Khan, S Halder, S Das, MS Goyat: "Graphitic nanoparticles functionalized with epoxy moiety for enhancing the mechanical performance of hybrid carbon fiber reinforced polymer laminated composites" Polymer Composites 42(2), 30/ Pages: 678-692 2021 https://doi.org/10.1002/pc.25857 SCI (3.531),
    23. MS Goyat, A Hooda, TK Gupta, K Kumar, S Halder, PK Ghosh, BS Dehiya: "Role of non-functionalized oxide nanoparticles on mechanical properties and toughening mechanisms of epoxy nanocomposites" Ceramics International 47(16), 87/ Pages: 22316-22344 August 2021 https://doi.org/10.1016/j.ceramint.2021.05.083 SCI (5.2),

    2020

    1. Kar S, Kumar S, Bandyopadhyay PP, Paul S: "Grinding of hard and brittle ceramic coatings: Force analysis" Grinding of hard and brittle ceramic coatings: Force analysis 2020 10.1016/j.jeurceramsoc.2019.12.058
    2. S. Pati, R. Roy, N. Deka, M. P. Boruah, M. Nath, R. Bhargav, P. R, Randive, P.P. Mukherjee: "Optimal heating strategy for minimization of peak temperature and entropy generation for forced convective flow through a circular pipe" International Journal of Heat and Mass Transfer 150 April 2020 10.1016/j.ijheatmasstransfer.2020.119318 (5.0),
    3. S.Shivankar, P. R. Randive, S. Pati: "Effects of undulated wall on the hydrodynamic and thermal transport characteristics of turbulent jet" International Journal of Thermal Sciences 152 June 2020 10.1016/j.ijthermalsci.2020.106297 SCIE (4.9),
    4. D. Bhowmick, S. Chakravarthy, P. Randive, S. Pati: "Numerical investigation on the effect of magnetic field on natural convection heat transfer from a pair of embedded cylinders within a porous enclosure" Journal of Thermal Analysis and Calorimetry 141 February 2020 10.1007/s10973-020-09411-6 (3.0),
    5. S. K. Mehta, S. Pati: "Numerical study of thermo-hydraulic characteristics for forced convective flow through wavy channel at different Prandtl numbers" Journal of Thermal Analysis and Calorimetry 141 February 2020 10.1007/s10973-020-09412-5 (3.0),
    6. B. K. Kanchan, P. Randive, S. Pati: "On the implication of porosity configuration on Lithium-ion cell performance: A numerical study" Journal of Electrochemical Energy Conversion and Storage 18(1), April 2020 10.1115/1.4046754 SCIE (2.7),
    7. S. Dutta, N. Goswami, S. Pati, A. K. Biswas: "Natural convection heat transfer and entropy generation in a porous rhombic enclosure: Influence of non-uniform heating" Journal of Thermal Analysis and Calorimetry 144 April 2020 10.1007/s10973-020-09634-7 (3.0),
    8. S. Dutta, S. Pati, A. K. Biswas: "Thermal transport analysis for natural convection in a porous corrugated rhombic enclosure" Heat Transfer 49(6), May 2020 10.1002/htj.21774 (2.8),
    9. B. K. Kanchan, P. Randive, S. Pati: "Numerical investigation of multi-layered porosity in the gas diffusion layer on the performance of a PEM fuel cell" International Journal of Hydrogen Energy 45(41), August 2020 10.1016/j.ijhydene.2020.05.218 SCIE (8.1),
    10. B. H. S. Raju, D. Nath, S. Pati: "Analysis of mixed convective heat transfer past an isoflux / isothermal sphere: Influence of Prandtl number" Physica Scripta 95(9), July 2020 10.1088/1402-4896/ab9f7c Scopus (2.6),
    11. B. Mondal, S. Pati, P. K. Patowari: "Fabrication of wavy micromixer using soft lithography technique" Materials Today: Proceedings 26 March 2020 10.1016/j.matpr.2020.02.254
    12. D. K. Deka, M. P. Boruah, S. Pati, P. Randive, P. P. Mukherjee: "Tuning the splitting behaviour of droplet in a bifurcating channel through wettability-capillarity interaction" Langmuir 35(36), August 2020 10.1021/acs.langmuir.0c01633 Scopus (3.7),
    13. B. H. S. Raju, D. Nath, S. Pati, L. Baranyi: "Analysis of mixed convective heat transfer from a sphere with an aligned magnetic field" International Journal of Heat and Mass Transfer 162 December 2020 10.1016/j.ijheatmasstransfer.2020.120342 SCIE (5.0),
    14. Md. Faizan, S. Pati, P. R. Randive: "Implication of geometrical configuration on heat transfer enhancement in converging minichannel using nanofluid by two phase mixture model: A numerical analysis" Proc IMechE Part E: J Process Mechanical Engineering 235(2), October 2020 10.1177/0954408920964694 Scopus (2.3),
    15. R. Dwivedi, S. Pati, P. K. Singh: "Combined effects of wall slip and nanofluid on interfacial transport from a thin film evaporating meniscus in a microfluidic channel" Microfluidics and Nanofluidics 24 October 2020 10.1007/s10404-020-02390-y (2.4),
    16. S. Santra, S. Das, and S. Chakraborty: "Electrically modulated dynamics of a compound droplet in aconfined microfluidic environment," Journal of Fluid Mechanics 2020
    17. S. Santra, D. P. Panigrahi, S. Das, and S. Chakraborty: "Shape evolution of compound droplet in thecombined presence of electric field and extensional flow" Physical Review Fluids 2020
    18. S. Santra, A. Jana, and S. Chakraborty: "Electric field modulated deformation dynamics of a compounddrop in the presence of confined shear flow" Physics of Fluids 2020
    19. S. Santra, S. Mandal, and S. Chakraborty: "Phase-field modeling of multicomponent and multiphase flowsin microfluidic systems: a review" Int. J. Numer. Methods Heat Fluid Flow 2020
    20. S. Santra, D. K. Mandal, and S. Chakrabarti: "A New Approach for Assessing the LDL Species in ArterialWall Layers" J. Inst. Eng. 2020
    21. Subrata Bhowmik, Abhishek Paul, Rajsekhar Panua, Subrata Kumar Ghosh: "Performance, combustion and emission characteristics of a diesel engine fueled with diesel-kerosene-ethanol: A multi-objective optimization study" Energy 211 November 2020 https://doi.org/10.1016/j.energy.2020.118305 SCIE (9),
    22. S Das, S Halder, NI Khan, B Paul, MS Goyat: "Assessing Damage Mitigation by Silanized Milled Graphite Nanoparticles in Hybrid GFRP Laminated Composites" Composites Part A: Applied Science and Manufacturing 132 25/ Pages: 1-10 May 2020 https://doi.org/10.1016/j.compositesa.2020.105784 SCI (8.7),
    23. Zhou Shengquan - Zhang Yongfei - Zhou Dawei - Wang Weijian - Ke Zhaibang - Sudipta Halder: "Fly Ash Foundation Reinforced By Cement–Soil Mixing Piles" DYNA 95 4/ Pages: 198-204 2020 http://dx.doi.org/10.6036/9364 SCI (2.07),

    2019

    1. M. P. Boruah, P. R. Randive, S. Pati: "Effect of non-uniform asymmetric heating on the thermal and entropy generation characteristics for flow of Al2O3-water nanofluid in a microchannel" International Journal of Numerical Methods for Heat & Fluid Flow 29(3), February 2019 http://dx.doi.org/10.1108/HFF-06-2018-0327 (4.2),
    2. B. Mondal, S. K. Mehta, P. K. Patowari, S. Pati: "Numerical study of mixing in wavy micromixers: comparison between raccoon and serpentine mixer" Chemical Engineering & Processing: Process Intensification 136 February 2019 10.1016/j.cep.2018.12.011 SCIE (3.8),
    3. B. Mondal, S. Pati, P. K. Patowari: "Analysis of mixing performances in microchannel with obstacles of different aspect ratio" Proc IMechE Part E: J Process Mechanical Engineering 233(5), February 2019 10.1177/0954408919826748 Scopus (2.3),
    4. A. Borah, M. P. Boruah, S. Pati: "Conjugate heat transfer in a duct using nanofluid by two-phase Eulerian-Lagrangian method: Effect of non-uniform heating" Powder Technology 346 March 2019 10.1016/j.powtec.2019.01.059 (4.5),
    5. S. Dutta, N. Goswami, A. K. Biswas, S. Pati: "Numerical investigation of magnetohydrodynamic natural convection heat transfer and entropy generation in a rhombic enclosure filled with Cu-water nanofluid" International Journal of Heat and Mass Transfer 136 June 2019 10.1016/j.ijheatmasstransfer.2019.03.024 (5.0),
    6. M. P. Boruah, S. Pati, P. R. Randive: "Implication of fluid rheology on the hydrothermal and entropy generation characteristics for mixed convective flow in a backward facing step channel with baffle" International Journal of Heat and Mass Transfer 137 July 2019 10.1016/j.ijheatmasstransfer.2019.03.094 (5.0),
    7. S. Dutta, A. K. Biswas, S. Pati: "Analysis of natural convection in a rhombic enclosure with undulations of the top wall-A numerical study" International Journal of Ambient Energy 43(1), June 2019 10.1080/01430750.2019.1630304 Scopus (0.43),
    8. S. Dutta, A. K. Biswas, S. Pati: "Numerical analysis of natural convection heat transfer and entropy generation in a porous quadrantal cavity" International Journal of Numerical Methods for Heat & Fluid Flow 29(12), November 2019 10.1108/HFF-11-2018-0678 (4.2),
    9. D. Bhowmick, P. R. Randive, S. Pati, H. Agrawal, A. Kumar, P. K. Srivastava: "Natural convection heat transfer and entropy generation from a heated cylinder of different geometry in an enclosure with non-uniform temperature distribution on the walls" Journal of Thermal Analysis and Calorimetry 141 November 2019 10.1007/s10973-019-09054-2 (3.2),
    10. S. Santra, S. Mandal, and S. Chakraborty: "Confinement effect on electrically induced dynamics of a dropletin shear flow" Physical Review 2019
    11. S. Santra, S. Das, and S. Chakraborty: "Electric field-induced pinch-off of a compound droplet in Poiseuilleflow" Physics of Fluids 2019
    12. S. Santra, D. Sen, S. Das, and S. Chakraborty: "Electrohydrodynamic interaction between droplet pairs in aconfined shear flow" Physics of Fluids 2019
    13. Prosun Mandal, Subhas Chandra Mondal: "Development and application of Cu-SWCNT nanocomposite–coated 6061Al electrode for EDM" International Journal of Advanced Manufacturing Technology 103 August 2019 https://doi.org/10.1007/s00170-019-03710-5 SCIE (2.9),
    14. Gourhari Ghosh, Prosun Mandal, Subhas Chandra Mondal: "Modeling and optimization of surface roughness in keyway milling using ANN, genetic algorithm, and particle swarm optimization" International Journal of Advanced Manufacturing Technology 100 1223-1242 February 2019 https://doi.org/10.1007/s00170-017-1417-4 SCIE (2.9),
    15. Subrata Bhowmik, Abhishek Paul, Rajsekhar Panua, Subrata Kumar Ghosh, Durbadal Debroy: "Artificial intelligence based gene expression programming (GEP) model prediction of Diesel engine performances and exhaust emissions under Diesosenol fuel strategies" Fuel 235 January 2019 https://doi.org/10.1016/j.fuel.2018.07.116 SCIE (6.7),
    16. Gopal Krishna Singh Khagokpam, Sudipta Halder: "Paraffin wax microsphere embedded epoxy composites for potential thermal management in electronic devices" High Performance Polymers 31(7), 8/Pages: 767-777 2019 https://doi.org/10.1177/0954008318792984 SCI (2.1),
    17. Nazrul I Khan, Sudipta Halder, Subhankar Das, Jialai Wang: "Exfoliation level of aggregated graphitic nanoplatelets by oxidation followed by silanization on controlling mechanical and nanomechanical performance of hybrid CFRP composites" Composite Part B: Engineering 173 42/ Pages: 1-12 September 2019 https://doi.org/10.1016/j.compositesb.2019.05.066 SCI (13.1),
    18. Tankeshwar Prasad, Sudipta Halder, Siddhartha S.Dhar: "Imidazole-supported silica one-pot processed nanoparticles to enhance toughness of epoxy based nanocomposites" Materials Chemistry and Physics 231 27/ Pages : 75-86 2019 https://doi.org/10.1016/j.matchemphys.2019.04.002 SCI (4.6),
    19. Nazrul Islam Khan, Sudipta Halder, Jialai Wang: "Diels-Alder based epoxy matrix and interfacial healing of bismaleimide grafted GNP infused hybrid nanocomposites" Polymer Testing 74 43/ Pages : 138-151 April 2019 https://doi.org/10.1016/j.polymertesting.2018.12.021 SCI (5.1),
    20. AS Singha, Sudipta Halder, J Wang, MA Imamd, P Chene: "Tannic Acid Intermediated Surface Functionalization of Bamboo Micron Fibers to Enhance Mechanical Performance of Hybrid GFRP" Composites Part B: Engineering 177 33/ Pages: 1-6 November 2019 https://doi.org/10.1016/j.compositesb.2019.107322 SCI (13.1),
    21. AS Singha, Sudipta Halder: "Tannic Acid Functionalization of Bamboo Micron Fibes: Its Capability to Toughen Epoxy Based Biocomposites" Materials Chemistry and Physics 243 19/ Pages: 1-7 2019 https://doi.org/10.1016/j.matchemphys.2019.122112 SCI (4.6),
    22. Subhanka Das, Sudipta Halder, Nazrul Islam Khan: "Surface Silanization of Recycled Chopped Carbon Fiber" International Journal of Engineering, Applied and Management Sciences Paradigms 54(1), Pages: 1-5 April 2019 SCI
    23. Pannalal Choudhury, Subhankar Das, Sudipta Halder: "Mechanical Characterization of Graphene Infused Hybrid GFRP Laminates" International Journal of Engineering, Applied and Management Sciences Paradigms 54(1), Pages:1-4 April 2019 SCI
    24. A Nandi, S Das, S Halder, A Chakrabortya, MA Imam: "Ultrasonically Assisted Electrophoretic Deposition of Oxidized Graphite Nanoparticle onto Carbon Fiber, Amending Interfacial Property of CFRP" Journal of Composite Materials 54(13), 16/ Pages: 1615-1625 October 2019 https://doi.org/10.1177/0021998319884109 SCI (2.9),

    2018

    1. S. Dutta, A. K. Biswas, S. Pati: "Natural convection heat transfer and entropy generation inside porous quadrantal enclosure with non-isothermal heating at the bottom wall" Numerical Heat Transfer, Part A: Applications 73(4), January 2018 10.1080/10407782.2018.1423773 SCIE (2.8),
    2. S. Pati, V. Kumar: "Effects of temperature-dependent thermophysical properties on hydrodynamic swirl decay in microtubes" Proc IMechE Part E: J Process Mechanical Engineering 233(3), January 2018 10.1177/0954408918755782 Scopus (2.3),
    3. Shubham, A. Saikia, A. Dalal, S. Pati: "Thermo-hydraulic transport characteristics of non-Newtonian fluid flows through corrugated channels" International Journal of Thermal Sciences 129 July 2018 10.1016/j.ijthermalsci.2018.02.005 SCIE (4.9),
    4. D. Nath, S. Pati, B. H. S. Raju: "Analysis of mixed convection past a heated sphere" Proc IMechE Part E: J Process Mechanical Engineering 233(3), June 2018 10.1177/0954408918780511 Scopus (2.3),
    5. M. P. Boruah, P. R. Randive, S. Pati: "Hydrothermal performance and entropy generation analysis for mixed convective flows over a backward facing step channel with baffle" International Journal of Heat and Mass Transfer 125 October 2018 10.1016/j.ijheatmasstransfer.2018.04.094 SCIE (5.0),
    6. B. H. S. Raju, D. Nath, S. Pati: "Effect of Prandtl number on thermo-fluidic transport characteristics for mixed convection past a sphere" International Communications in Heat and Mass Transfer November 2018 10.1016/j.icheatmasstransfer.2018.08.013 SCIE (6.4),
    7. G. C. Pal, N. Goswami, S. Pati: "Numerical investigation of unsteady natural convection heat transfer and entropy generation from a pair of cylinders in a porous enclosure" Numerical Heat Transfer, Part A: Applications 74(6), November 2018 10.1080/10407782.2018.1507887 SCIE (2.6),
    8. S. Pati, P. K. Mondal: "Limiting thermal characteristics for flow of non-Newtonian fluids between asymmetrically heated parallel plates: an analytical study" Proc IMechE Part E: J Process Mechanical Engineering 233(4), November 2018 10.1177/0954408918814978 Scopus (2.3),
    9. M. P. Boruah, A. Sarker, P.R. Randive, S. Pati, S. Chakraborty: "Wettability-Mediated Dynamics of Two-Phase Flow in Microfluidic T-junction" Physics of Fluids 30(12), December 2018 10.1063/1.5054898 SCIE (4.1),
    10. S. K. Mehta, S. Pati: "Analysis of thermo-hydraulic performance and entropy generation characteristics for laminar flow through triangular corrugated channel" Journal of Thermal Analysis and Calorimetry 136 December 2018 10.1007/s10973-018-7969-1 SCIE (3.0),
    11. Rajeev Nayan Gupta and A.P.Harsha: "Tribological study of castor oil with surface modified CuO nanoparticles in boundary lubrication" Industrial Lubrication and Tribology 2018 https://doi.org/10.1108/ILT-02-2017-0030 SCIE
    12. Subhashish Dey, G.C.Dhal, Devendra Mohan, Ram Prasad and Rajeev Nayan Gupta: "Cobalt doped CuMnOx catalysts for the preferential oxidation of carbon monoxide" Applied Surface Science 441 2018 https://doi.org/10.1016/j.apsusc.2018.02.048 SCI
    13. Rajeev Nayan Gupta, A.P.Harsha and Sagar Singh: "Tribological study on rapeseed oil with nanoadditives in close contact sliding situation" Applied Nanoscience 8 2018 DOI:10.1007/s13204-018-0670-7 SCIE
    14. Rajeev Nayan Gupta and A.P.Harsha: "Friction and wear of nano-additive based biolubricants in steel-steel sliding contacts – A comparative study" Journal of Materials Engineering and Performance 27 2018 https://doi.org/10.1007/s11665-018-3175-3 SCIE
    15. S. Santra, S. Das, S. S. Das, and S. Chakraborty: "Surfactant-induced retardation in lateral migration ofdroplets in a microfluidic confinement, Microfluid" Nanofluidics, 2018
    16. S. Santra, S. Mandal, and S. Chakraborty: "Electrohydrodynamics of confined two-dimensional liquiddroplets in uniform electric field" Physics of Fluids 2018
    17. Subrata Bhowmik, Rajsekhar Panua, Subrata Kumar Ghosh, Abhishek Paul, Durbadal Debroy: "Prediction of performance and exhaust emissions of diesel engine fuelled with adulterated diesel: An artificial neural network assisted fuzzy-based topology optimization" Energy and Environment 29(8), June 2018 https://doi.org/10.1177/0958305X18779576 SCIE (4),
    18. Subrata Bhowmik, Abhishek Paul, Rajsekhar Panua, Subrata Kumar Ghosh, Durbadal Debroy: "Performance-exhaust emission prediction of diesosenol fueled diesel engine: An ANN coupled MORSM based optimization" Energy 153 June 2018 https://doi.org/10.1016/j.energy.2018.04.053 SCI (9),
    19. Abhishek Paul, Subrata Bhowmik, Rajsekhar Panua, Durbadal Debroy: "Artificial Neural Network Based Prediction of Performances-Exhaust Emissions of Diesohol Piloted Dual Fuel Diesel Engine under Varying CNG Flowrates." Journal of Energy Resource and Technology 140(11), November 2018 https://doi.org/10.1115/1.4040380 SCIE (2.6),
    20. Subrata Bhowmik, Rajsekhar Panua, Subrata Kumar Ghosh, Durbadal Debroy, Abhishek Paul: "A Comparative Study of Artificial Intelligence Based Models to Predict Performance and Emission Characteristics of a Single Cylinder Diesel Engine Fueled With Diesosenol" J. Thermal Sci. Eng. Appl. 10(4), March 2018 https://doi.org/10.1115/1.4038709 SCIE (1.6),
    21. Animesh Sinha, Nazrul Islam Khan, Subhankar Das, Jiawei Zhang, Sudipta Halder: "Effect of reactive and non-reactive diluents on thermal and mechanical properties of epoxy resin" High performance polymer 30(10), 57/Pages: 1159-1168 December 2018 https://doi.org/10.1177/0954008317743307 SCI (2.1),
    22. M.S.Goyat, S.Rana, Sudipta Halder, P.K.Ghosh: "Facile Fabrication of Epoxy-TiO 2 Nanocomposites: A Critical Analysis of TiO2 Impact on Mechanical Properties and Toughening Mechanisms" Ultrasonic Sonochemistry 40 127/ Pages: 861-873 2018 https://doi.org/10.1016/j.ultsonch.2017.07.040 SCI (8.4),
    23. Kh. Gopal Krishna Singh, Sudipta Halder, Sukumar Pati, Jialai Wang: "Microencapsulation of Paraffin Wax Microspheres with Silver" Defense Science Journal 68(2), 9/ Pages: 218-224 March 2018 10.14429/dsj.68.11410 SCI (0.5),
    24. Nazrul Islam Khan, Sudipta Halder, Subhankar Das, M.S. Goyat: "Parametric influence towards size reduction of poly(methylmethacrylate) shelled microcapsule with epoxy core" Materials Today Proceeding 5(1), 7/Pages: 2295-2299 2018 https://doi.org/10.1016/j.matpr.2017.09.232 SCI
    25. Subhankar Das, Sudipta Halder, Arijit Sinha, Muhammad Ali Imam, and Nazrul Islam Khan: "Assessing Nanoscratch Behavior of Epoxy Nanocomposite Toughened with Silanized Fullerene" ACS Applied Nano Materials 1(7), 25/Pages: 3653-3662 June 2018 https://doi.org/10.1021/acsanm.8b00763 SCI (5.9),
    26. Jiawei Zhang, Fangyu Luo, Tingbin Liu, Jianchang Zhao, Sudipta Halder: "Galerkin Analysis of Effect of Dead Load on Natural Frequencies of Box Beam" Journal of The Institution of Engineers, India: Series C 100(6), Pages: 949-954 October 2018 https://doi.org/10.1007/s40032-018-0494-y SCI
    27. S Das, NI Khan, S Halder: "Thermo-mechanical stability of epoxy composites induced with surface silanized recycled carbon fibers" IOP Conference Series: Materials Science and Engineering 377(1), 6 2018 10.1088/1757-899X/377/1/012172 SCI
    28. NI Khan, S Halder, SB Gunjan, T Prasad: "A review on Diels-Alder based self-healing polymer composites" IOP Conference Series: Materials Science and Engineering 377(1), 56 2018 10.1088/1757-899X/377/1/012007 SCI

    2017

    1. P. Kaushik, P. K. Mondal, S. Pati, S. Chakraborty: "Heat transfer and entropy generation characteristics of a nonNewtonian fluid squeezed and extruded between two parallel plates" ASME Journal of Heat Transfer 139(2), February 2017 10.1115/1.4034898 Scopus (2.8),
    2. S. Pati, S. K. Mehta, A. Borah: "Numerical investigation of thermo-hydraulic transport characteristics in wavy channels: comparison between raccoon and serpentine channels" International Communications in Heat and Mass Transfer 88 November 2017 10.1016/j.icheatmasstransfer.2017.09.001 SCIE (6.4),
    3. Rajeev Nayan Gupta and A.P.Harsha: "Tribological evaluation of calcium-copper-titanate/cerium oxide based nanolubricants in sliding contact" Lubrication Science 30(4), 2017 https://doi.org/10.1002/ls.1415 SCIE
    4. Rajeev Nayan Gupta and A.P.Harsha: "Antiwear and extreme pressure performance of castor oil with nano additives" Journal of Engineering Tribology 232(9), 2017 doi:10.1177/1350650117739159 SCIE
    5. Rajeev Nayan Gupta and A.P.Harsha: "Synthesis, characterization and tribological studies of calcium-copper-titanate nanoparticles as a biolubricant additive" ASME Journal of Tribology 139(2), 2017 https://doi.org/10.1115/1.4033714 SCIE
    6. S. Santra, D.K Mandal, S. Chakrabarti,: "“Effect of pulsatile blood flow on LDL transport in arterial layers”," Progress in Computational Fluid Dynamics, An International Journal, 18(3), 2017
    7. S. Santra, D.K Mandal, S. Chakrabarti,: "“Assessment of accumulation rate of LDL species in arterial wall layers under hypertension and hyperlipidemia conditions”," International Journal of Fluid Mechanics Research 44(1), 2017
    8. S. Santra, D.K Mandal, S. Chakrabarti,: "“Effect of Hypertension and Hyperlipidemia on LDL Transport in Arterial Layers for Newtonian and non-Newtonian Aspects of Blood”" International Journal of Transport Phenomenon, 14(3), 2017
    9. Abhishek Paul, Rajsekhar Panua, Durbadal Debroy: "An experimental study of combustion, performance, exergy and emission characteristics of a CI engine fueled by Diesel-ethanol-biodiesel blends" Energy 141 December 2017 https://doi.org/10.1016/j.energy.2017.09.137 SCI (9),
    10. Subrata Bhowmik, Rajsekhar Panua, Durbadal Debroy, Abhishek Paul: "Artificial Neural Network Prediction of Diesel Engine Performance and Emission Fueled With Diesel–Kerosene–Ethanol Blends: A Fuzzy-Based Optimization" J. Energy Resour. Technol. 139(4), July 2017 https://doi.org/10.1115/1.4035886 SCIE (2.6),
    11. Nazrul Islam Khan, Sudipta Halder, M.S. Goyat: "Influence of dual-component microcapsules on self-healing efficiency and performance of metal-epoxy composite-lap joints" Journal of Adhesion 93(12), 25/Pages: 949-963 2017 https://doi.org/10.1080/00218464.2016.1193806 SCI (2.366),
    12. Sudipta Halder, Tankeshwar Prasad, Nazrul Khan, Manjeet Goyat, R Chauhan: "Superior Mechanical Properties of Poly Vinyl Alcohol-Assisted ZnO Nanoparticle Reinforced Epoxy Composites" Material Chemistry and Physics 192(1), 32/Pages: 198-209 2017 https://doi.org/10.1016/j.matchemphys.2016.12.055 SCI (2.781),
    13. Pannalal Choudhury, Sudipta Halder, Nazrul Islam Khan, Jialai Wang, Krishna Murari Pandey: "Enhanced crack suppression ability of hybrid glass fiber reinforced laminated composites fabricated using GNP/epoxy system by optimized UDM parameters" Ultrasonic Sonochemistry 39 19/Pages: 174-187 November 2017 https://doi.org/10.1016/j.ultsonch.2017.04.014 SCI (7.279),
    14. Jaideep Adhikari , Bhabatosh Biswas, Sumit Chabri, Nil Ratan Bandyopadhyay, Sudipta Halder, Bhairab Chandra Mitra, Arijit Sinha: "Mechanical properties of metal oxide dispersed jute fiber reinforced polyester biocomposites" Polymer composites 39(S1), 22/Pages: E101-E112 2017 https://doi.org/10.1002/pc.24410 SCI (2.268),
    15. Ashangbam Satyavrata Singh, Sudipta Halder, Jialai Wang, Jagadish: "Extraction of bamboo micron fibres by optimized mechano-chemical process using a central composite design and their surface modification" Materials Chemistry and Physics 199 27/ Pages: 23-33 2017 https://doi.org/10.1016/j.matchemphys.2017.06.040 SCI (2.781),
    16. Subhankar Das, Sudipta Halder, Jialai Wang, MS Goyat, A Anil Kumar, Yi Fang: "Amending the thermo-mechanical response and mechanical properties of epoxy composites with silanized chopped carbon fibers" Composites Part A: Applied Science and Manufacturing 102 33/Pages: 347-356 November 2017 https://doi.org/10.1016/j.compositesa.2017.07.026 SCI (6.282),

    2016

    1. S. Gavhane, S. Pati, S. K. Som: "Evaporation of Multicomponent Liquid Fuel Droplets: Influences of Component Composition in Droplet and Vapor Concentration in Free Stream Ambience" International Journal of Thermal Sciences 105 July 2016 10.1016/j.ijthermalsci.2016.03.003 SCIE (4.9),
    2. Rajeev Nayan Gupta, A.K.Das, Nagahanumaiah and Henal Shah: "Pulse electro co-deposited Ni-WC composite coating" Materials and Manufacturing Processes 31 2016 https://doi.org/10.1080/10426914.2015.1019087 SCIE
    3. Sudipta Halder*, Soyeb Ahemad, Subhankar Das: "Epoxy/Glass Fiber Laminated Composites Integrated with Amino Functionalized ZrO2 for Advanced Structural Applications" ACS Applied Materials & Interfaces 8(3), 75/ Pages: 1695-1706 2016 https://doi.org/10.1021/acsami.5b09149 SCI (8.456),
    4. Tankeshwar Prasad, Sudipta Halder, S S Dhar: "Morphological dissimilarities of ZnO nanoparticles and its effect on thermo‐physical behavior of epoxy composites" Polymer Composites 39(1), 9/ Pages:135-145 2016 https://doi.org/10.1002/pc.23914 SCI (2.268),
    5. Nazrul Islam Khan, Sudipta Halder*, M.S. Goyat: "Effect of epoxy resin and hardener containing microcapsules on healing efficiency of epoxy adhesive based metal joints" Materials chemistry and physics 171 44/Pages:267-275 2016 https://doi.org/10.1016/j.matchemphys.2016.01.017 SCI (2.781),
    6. Ikbal Choudhury, Sudipta Halder*, Nazrul Islam Khan, Abhinav Mathur, Writuparna Nath: "Effect of TETA Microcapsules on Self-Healing Ability of Dual Component Epoxy System" Applied Materials letters 7(10), 8/ Pages: 836-843 2016 http://dx.doi.org/10.5185/amlett.2016.6213 SCI (1.9),
    7. Subhankar Das, Sudipta Halder*, Kaushal Kumar: "A comprehensive study on step-wise surface modification of C60: Effect of oxidation and silanization on dynamic mechanical and thermal stability of epoxy nanocomposite" Material Chemistry and Physics 179 27/ Pages: 120-128 2016 https://doi.org/10.1016/j.matchemphys.2016.04.085 SCI (2.781),
    8. B Paul, S Dhar, DD Purkayastha, S Das, Sudipta Halder: "Facile one-pot strategy to prepare Ag/Fe2O3 decorated reduced graphene oxide nanocomposite and its catalytic application in chemoselective undsreduction of nitroarenes" Journal of Alloys and Compound 681 41/ Pages: 316-323 2016 https://doi.org/10.1016/j.jallcom.2016.04.229 SCI (4.175),

    2015

    1. S. Bhardwaj, A. Dalal, S Pati: "Influence of wavy wall and non-uniform heating on natural convection heat transfer and entropy generation inside porous complex enclosure" Energy 79 January 2015 10.1016/j.energy.2014.11.036 SCIE (9.0),
    2. Abhishek Paul, Rajsekhar Panua, Durbadal Debroy, Probir Kumar Bose: "A performance-emission tradeoff study of a CI engine fueled by compressed natural gas (CNG)/diesel–ethanol-PPME blend combination" Environmental Progress and Sustainable Energy 35(2), August 2015 https://doi.org/10.1002/ep.12223 SCIE (2.1),
    3. Madhujit Deb , Abhishek Paul , Durbadal Debroy , G.R.K. Sastry , Raj Sekhar Panua , P.K. Bose: "An experimental investigation of performance-emission trade off characteristics of a CI engine using hydrogen as dual fuel" Energy 85 June 2015 https://doi.org/10.1016/j.energy.2015.03.108 SCI (9),
    4. Abhishek Paul a , Raj Sekhar Panua a , Durbadal Debroy a , Probir Kumar Bose: "An experimental study of the performance, combustion and emission characteristics of a CI engine under dual fuel mode using CNG and oxygenated pilot fuel blends" Energy 86 June 2015 https://doi.org/10.1016/j.energy.2015.04.050 SCI (9),
    5. Abhishek Pau, Rajsekhar Panua, Probir Kumar Bose: "Effect of Diesel–Ethanol–PPME (Pongamia piñata Methyl Ester) Blends as Pilot Fuel on CNG Dual-Fuel Operation of a CI Engine: A Performance-Emission Trade-Off Study" Energy & Fuels 29(4), March 2015 DOI: 10.1021/ef502515h SCIE (5.2),
    6. Abhishek Paul, Probir Kumar Bose, RajSekhar Panua, Durbadal Debroy: "Study of performance and emission characteristics of a single cylinder CI engine using diethyl ether and ethanol blends" Journal of the Energy Institute 88(1), February 2015 https://doi.org/10.1016/j.joei.2014.07.001 SCIE (5.7),
    7. Tankeshwar Prasad, Sudipta Halder: "Optimization of Parameters and its Effect on Size of ZnO Nanoparticles Synthesized by Sol-gel Method" Advances in Intelligent Systems and Computing 336 3? Pages: 399-407 2015 10.1007/978-81-322-2220-0_32 SCI
    8. Ikbal Choudhury, Sudipta Halder: "Synthesis of self-healing thermosetting resin based capsules and their related complexities" Advanced Materials Research 1119 2/ Pages428-432 2015 https://doi.org/10.4028/www.scientific.net/AMR.1119.428 SCI
    9. Sudipta Halder*, M.S. Goyat and P.K. Ghosh: "Morphological, structural, and thermophysical properties of zirconium dioxide–epoxy nanocomposites" High Performance Polymer 28(6), 24/ 2015 https://doi.org/10.1177/0954008315595275 SCI (1.584),
    10. Sudipta Halder*, M.S. Goyat and P.K. Ghosh: "Influence of ultrasonic dual mode mixing on the morphology, molecular structure and thermo-physical properties of a SiO2-epoxy nanocomposite adhesive" Journal of adhesion science and technology 29(23), 16/ 2015 https://doi.org/10.1080/01694243.2015.1075858 SCI (1.210),
    11. Manjeet Singh Goyat*, Sumit A.S.; Sumit Bahl; Sudipta Halder; Prakriti Ghosh: "Thermomechanical response and toughening mechanisms of a carbon nano bead reinforced epoxy composite" Materials chemistry and physics 166 55/ Pages: 144-152 2015 https://doi.org/10.1016/j.matchemphys.2015.09.038 SCI (2.781),
    12. Pannalal Choudhury*, Subhankar Das, Sudipta Halder: "Free edge mixed mode delamination analysis of laminated composites with wrap-around configuration-A Finite Element Study" Free edge mixed mode delamination analysis of laminated composites with wrap-around configuration-A Finite Element Study 97 Pages: 181-191 2015 10.1007/s40033-015-0099-z SCI

    2014

    1. S. Pati, P. Kaushik, S. Chakraborty, S. K. Som: "Film condensation in presence of non-condensable gases: Interplay between variable radius of curvature and interfacial slip" International Communications in Heat and Mass Transfer 56 August 2014 10.1016/j.icheatmasstransfer.2014.04.021 SCIE (6.4),
    2. Abhishek Paul, Rajsekhar Panua, Durbadal Debroy, Probir Kumar Bose: "Effect of diethyl ether and ethanol on performance, combustion, and emission of single-cylinder compression ignition engine" International Journal of Ambient Energy 38(1), October 2014 https://doi.org/10.1080/01430750.2014.952843 Scopus
    3. Abhishek Paul , Raj Sekhar Panua , Durbadal Debroy , Probir Kumar Bose: "Effect of compressed natural gas dual fuel operation with diesel and Pongamia pinnata methyl ester (PPME) as pilot fuels on performance and emission characteristics of a CI (compression ignition) engine" Energy 68 April 2014 https://doi.org/10.1016/j.energy.2014.03.026 SCI (9),
    4. Sudipta Halder, S. Sakthivel, P. D. Gupta: "Studies of transesterification of karanja (Pongamia pinnata) oil in a packed bed reactor" Chemical engineering communications 201(1), 6/ Pages: 88-101 2014 https://doi.org/10.1080/00986445.2012.762627 SCI (1.431),
    5. Ikbal Choudhury*, Abhinav Mathur, Sudipta Halder,: "Determination of Elastic Behaviour of Self-Healing Composites" International Journal of Latest Technology in Engineering, Management & Applied Science 2014 SCI

    2013

    1. S. Pati, S K Som, S. Chakraborty: "Slip-driven alteration in film condensation over vertical surfaces" International Communications in Heat and Mass Transfer 46 August 2013 10.1016/j.icheatmasstransfer.2013.05.002 (6.4),
    2. S. Pati, S K Som, S. Chakraborty: "Thermodynamic performance of microscale swirling flows with interfacial slip" International Journal of Heat and Mass Transfer 57(1), January 2013 10.1016/j.ijheatmasstransfer.2012.10.045 SCIE (5.0),
    3. S. Pati, S K Som, S. Chakraborty: "Combined influences of electrostatic component of disjoining pressure and interfacial slip on thin film evaporation in nanopores" International Journal of Heat and Mass Transfer 64 September 2013 10.1016/j.ijheatmasstransfer.2013.04.049 SCIE (5.0),
    4. Abhishek Paul , Probir Kumar Bose , Raj Sekhar Panua , Rahul Banerjee: "An experimental investigation of performance-emission trade off of a CI engine fueled by diesel–compressed natural gas (CNG) combination and diesel–ethanol blends with CNG enrichment" Energy 55 June 2013 https://doi.org/10.1016/j.energy.2013.04.002 SCI (9),
    5. S Sakthivel, Sudipta Halder, PD Gupta: "Influence of co-solvent on production of biodiesel in batch and continuous process" International Journal of Green Energy 10(8), 43/10 May 2013 https://doi.org/10.1080/15435075.2012.727365 SCI (1.302),
    6. S. Sakthivel, Sudipta Halder, P. D. Gupta: "Optimization of process variables for production of biodiesel in packed bed reactor using response surface methodology" International Journal of ambient energy 34(2), 21/Pages: 83-91 December 2013 https://doi.org/10.1080/01430750.2012.740422 SCI
    7. Sudipta Halder, P.K. Ghosh, M.S. Goyat and S. Ray: "Ultrasonic Dual Mode Mixing and its Effect on Tensile Properties of SiO2-Epoxy Nanocomposite" Journal of Adhesion Science and Technology 27(2), 63/Pages: 111-124 2013 https://doi.org/10.1080/01694243.2012.701510 SCI (1.210),
    8. 7. P.K. Ghosh, Sudipta Halder*, M.S. Goyat, and Karthik G: "Study on Thermal and Lap Shear Characteristics of Epoxy Adhesive Loaded with Metallic and Non-Metallic Particles" The Journal of Adhesion 89(1), 63 /Pages: 55-75 2013 https://doi.org/10.1080/00218464.2012.739006 SCI (2.366),
    9. Subhankar Das*, Pannalal Chowdhury, Sudipta Halder: "Stress and Free Edge Delamination Analyses of Delaminated Composite Structure using ANSYS" Journal of Procedia Engineering 64 30/ Pages:1364-1373 2013 https://doi.org/10.1016/j.proeng.2013.09.218 SCI

    2012

    1. P. Kaushik, S. Pati, S. K. Som, S. Chakraborty: "Hydrodynamic swirl decay in microchannels with interfacial slip" Nanoscale and Microscale Thermophysical Engineering 16(2), May 2012 10.1080/15567265.2012.655851 SCIE (2.7),
    2. P Kaushik, S. Pati, S. K. Som, S. Chakraborty: "Hydrodynamic and thermal transport characteristics of swirling flows through microchannels with interfacial slip" International Journal of Heat and Mass Transfer 55(15-16), July 2012 10.1016/j.ijheatmasstransfer.2012.04.004 SCIE (5.0),
    3. J. Chakraborty, S. Pati, S. K. Som, S. Chakraborty: "Consistent description of electrohydrodynamics in narrow fluidic confinements in presence of hydrophobic interactions" Physical Review E April 2012 10.1103/PhysRevE.85.046305 SCIE (2.2),
    4. Sudipta Halder, P.K. Ghosh and M.S. Goyat: "Influence of ultrasonic dual mode mixing on morphology and mechanical properties of ZrO2-epoxy nanocomposite" High Performance Polymers 24(4), 54/11 2012 https://doi.org/10.1177/0954008312440714 SCI (1.584),
    5. Sudipta Halder, A K Pandya, A Mitra, A Basu Mallic: "Crystallization behavior and Curie temperature Properties of Al doped Nd-Fe-B based Nanocomposite Permanent Magnet" Advance Materials Research 585 Pages: 149-153 November 2012 https://doi.org/10.4028/www.scientific.net/AMR.585.149 SCI
    6. P.K. Ghosh, Abhishek Pathak, M.S. Goyat and Sudipta Halder: "Influence of nanoparticle weight fraction on morphology and thermal properties of epoxy/TiO2 nanocomposite" Journal reinforced plastics and composites 31(17), 101/9 August 2012 https://doi.org/10.1177/0731684412455955 SCI (1.786),

    2011

    1. S. Pati, S. Chakraborty, S. K. Som: "Influence of ambient vapor concentration on droplet evaporation in a perspective of comparison between diffusion controlled model and kinetic model" International Journal of Heat and Mass Transfer 54(21-22), October 2011 10.1016/j.ijheatmasstransfer.2011.06.020 SCIE (5.0),
    Ministry-of-education
    Skill-India
    Digital-India
    India.gov.in
    Swachh-Bharat
    Data-gov.in